Close
Subscribe to newsletters
Email:

Electronic Dice Soldering Kit

The Electronic Dice Kit is a simplistic and entertaining project which can be built by the novice ki...
SKU: KIT-02485
Availability: Out of stock
R64,40
:

Description

The Electronic Dice Kit is a simplistic and entertaining project which can be built by the novice kit builder in about 1 hour. Power to the circuit in through by a 4.5v to 5v DC power source and once powered up, simply press the Roll button (S1) and the dice will roll. After a few seconds, the display will show the value of your roll through a combination of the seven LEDs.

The circuit consists of a pulse generator and a decimal counting circuit. The multi vibrator is formed by NE555 and the associated components. After pressing S1, Q1 is on and PIN 3 of NE555 outputs pulses to the counter. Five output ends of CD4017 output the high level by turns. Seven LED light up and indicate 1-6 points with the results of the different combination between resistors and driver transistors.

Features

  • Power to the circuit is through the power connector at J1 and requires 4.5v – 5v DC
  • Board Size: 7.6cm x 3.6cm
  • Requires soldering
  • Includes:

Board:
1 x Bare PC board ready for building

Resistors:
3 x 470 ohm 1/4 watt resistor (R8, R9, R10)
1 x 1K ohm 1/4 watt resistor (R7)
9 x 10K ohm resistor (R3, R4, R5, R6, R12, R13, R14, R15, R16)
1 x 3.3M ohm resistor (R2)
1 x 4.7M ohm resistor (R11)
1 x 10M ohm resistor (R1)

Capacitors:
1 x .1uF disc capacitor (labelled 104P) (C2)
1 x 1uF / 50 electrolytic capacitor (C1)

LEDs:
7 x Red LEDs (D1 to D7)

Switch:
1 x mini pus hbutton (S1)

Transistors:
3 x S8050 Transistor (labelled 8050) (Q2, Q4, Q5)
2 x S8550 Transistor (labelled 8550) (Q1, Q3)

Sockets:
1 x 16 pin IC Socket (U2)
1 x 8 pin IC Socket (U1)

Connector:
1 x Power Connector (J1)

Documents